Installation of Quartus Prime 19.1 Lite & ModelSim

Please follow below link for the installation of the softwares.

Installation Link

Please select the options which are displayed below

There are two ways for installing the software:

1. Installing by downloading Combined Files
2. Installing by downloading Individual Files

We will Download from Individual files since we are working with a perticular board so it will save some data :)

Please select the options which are displayed below and download 3 files for getting started with installation.

After downloading the files this 3 files will be there in download folder or it will be on the perticular path which you have selected.

Installation steps

1. Double click on highlited application and install it with the default options.

   • At the end it will take some time for getting Quartus and ModelSim installed.

2. After the installation we need to add the device which is Cyclone 4, It's for getting the support of de0 - neno board.

   • copy the cyclone-19.1.0.670.qdz file( which is for Cyclone IV support file) in the C:/intelFPGA lite/19.1/modelsim ase/win32aloem for getting the support of that device family while working with the project.
   • QDZ file is a Altera Quartus II Device Package. Altera Quartus is a programmable logic device design software from Altera which is now owned by INTEL.

• There is another way of adding the device!
  • click on start menu and search for Device installer

• Open this application and do as directed

• Click on the next

• Select the folder in which you are having .qdz file/files and then click on the next.

• Select the required device and click on the next and get it done!

Now the installation is done ;)